Macropoxy 646 part b sds.

MACROPOXY® 646 Fast Cure Epoxy Coating (Part A), Mill White MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 Prospect Avenue N.W. Cleveland, OH 44115 Telephone Numbers and Websites Product Information (800) 524-5979 www.sherwin-williams.com Regulatory Information (216) 566-2902 …A two-component, high-solids polyamidoamine epoxy lining. Developed for potable water storage tanks, the Macropoxy® 5500LT tank lining displays superior spray and performance properties that make it ideal for field or shop applications. Interested in learning more or purchasing this product?MACROPOXY 920 PRE-PRIME is a 100% solids, penetrating epoxy primer designed for use over marginally prepared steel or concrete surfaces. A penetrating sealer for tight rusted surfaces. A penetrating sealer for concrete and masonry surfaces. Low viscosity. Barrier coat for hot solvent topcoats. MACROPOXY® 646 Fast Cure Epoxy (Part B) Hardener Not available. Liquid. US / Canada: (216) 566-2917 Mexico: SETIQ 01-800-00-214-00 / D.F. 5559-1588 24 hours / 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::

• Approved topcoat for NEPCOAT System B P $ 1 %. 1,-" $ C ' 1 " 3 $ 1 (2 3 (" 2 Substrate*: Steel Surface Preparation*: SSPC-SP10/NACE 2 System Tested*: 1 ct. Macropoxy 646 @ 6.0 mils (150 microns) dft 1 ct. Acrolon 218 HS Gloss @ 4.0 mils (100 microns) dft *unless otherwise noted below Test Name Test Method Results Abrasion Resistance1 ASTM ...

• Acceptable for use as part of a system with cathodic protection systems ... Macropoxy 646 5.0-10.0 (125-250) Steel, Epoxy/Urethane, Atmospheric 1 Ct. Macropoxy 240 3.0-5.0 (75-125) ... Refer to the SDS sheet before use. Published technical data and instructions are subject to change without notice. Contact Footnotes: 1 Zinc Clad II Plus Primer. MACROPOXY 646-100 FAST CURE EPOXYis a high solids, less than 100 g/L VOC, high build, fast drying, polyamide epoxy designed to protect steel and concrete in industrial exposures. Ideal for maintenance painting and fabrication shop applications.

A two-component, high-solids, fast-drying polyamide epoxy. Classified by UL to ANSI/NSF 61 as a tank lining for potable water storage tanks, Macropoxy® 646 PW Epoxy has high-solids content that ensures adequate protection of sharp edges, corners and welds. The B58VX0605 Hardener contains OptiCheck OAP pigment technology for rapid holiday ...PRODUCT INFORMATION. PRODUCT DESCRIPTION. RECOMMENDED USES. MACROPOXY 646 PW EPOXY is a high solids, high build, fast drying, polyamide epoxy classified by UL to ANSI/NSF 61 as a tank lining for potable water storage tanks. The high solids content ensures ad-equate protection of sharp edges, corners, and welds.• Approved topcoat for NEPCOAT System B P $ 1 %. 1,-" $ C ' 1 " 3 $ 1 (2 3 (" 2 Substrate*: Steel Surface Preparation*: SSPC-SP10/NACE 2 System Tested*: 1 ct. Macropoxy 646 @ 6.0 mils (150 microns) dft 1 ct. Acrolon 218 HS Gloss @ 4.0 mils (100 microns) dft *unless otherwise noted below Test Name Test Method Results Abrasion Resistance1 ASTM ...MACROPOXY® 646 Fast Cure Epoxy Coating (Part A), Mill White MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 Prospect Avenue N.W. Cleveland, OH 44115 Telephone Numbers and Websites Product Information (800) 524-5979 www.sherwin-williams.com Regulatory Information (216) 566-2902 www.paintdocs.com Medical Emergency (216) 566-2917

SDS management, distribution & revision solutions - for every budget. Free access to more than 4.5 million safety data sheets available online, brought to you by 3E. Macropoxy 646-100 Fast Cure Epoxy (Part B) Hardener - Free SDS search

Macropoxy 646 5.0-10.0 (125-250) ... Then combine one part by volume of Part A with one part by volume of Part B. Thoroughly agitate the mixture with power agita-tion. Allow the material to sweat-in as indicated prior to application. Re-stir before using. HEALTH AND SAFETY Refer to the SDS sheet before use.

SAFETY DATA SHEET. B58VX605. Section 1. Identification. Product name : MACROPOXY® 646 PW Potable Water Epoxy Hardener (Part B) Hardener OAP. …Free SDS service for retailers, eCommerce and users of chemicals. ... MACROPOXY 646 Fast Cure Epoxy (Part A) 1.2.1 Relevant identified uses. Paint or paint related ...MACROPOXY® 646 Fast Cure Epoxy (Part B) - Hardener Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II B58V600 MACROPOXY® 646 Fast Cure Epoxy (Part B) - Hardener SAFETY DATA SHEET Product name: 1.1 Product identifier 1.3 Details of the supplier of the safety data sheet e-mail address of person responsible for this SDS:[email protected]• Approved topcoat for NEPCOAT System B P $ 1 %. 1,-" $ C ' 1 " 3 $ 1 (2 3 (" 2 Substrate*: Steel Surface Preparation*: SSPC-SP6 System Tested*: 1 ct. Zinc CLad 4100 @ 4.0 mils (100 microns) dft 1 ct. Macropoxy 646 @ 7.5 mils (188 microns) dft 1 ct. Hi-Solids polyurethane 250 @ 4.0 mils (100 microns) dft *unless otherwise noted below Test ...Refer to the SDS sheet before use. ... 1 ct Macropoxy 646 SE-Shop Epoxy 4.0-6.0 (100-150) 1 ct Acrolon 218 HS Polyurethane 3.0-6.0 (75-150) ... combine one part by volume of Part A with one part by volume of Part B. Thoroughly agitate the …MACROPOXY 646 Fast Cure Epoxy Mastic is a high solids, high build, fast drying, polyamide epoxy designed to protect steel and concrete in industrial exposures. Ideal for maintenance painting and fabrication shop applications. The high solids content ensures adequate protection of sharp edges, corners, and welds.

MACROPOXY® 646 FF Epoxy Coating (Part A) Gray Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: MACROPOXY® 646 Fast Cure Epoxy (Part A) - Mill White Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II B58W610 MACROPOXY® 646 Fast Cure Epoxy (Part A) - Mill White SAFETY DATA SHEET Product name: 1.1 Product identifier 1.3 Details of the supplier of the safety data sheet e-mail address of person responsible for this SDS:[email protected] APPLICATION EQUIPMENT. Sherwin-Williams® MACROPOXY® 646 can be applied by a nylon plaster blend or natural bristle brush. It can also be applied with a conventional spray gun and paint pressure pot with pressure cup as well as with an airless sprayer with a minimum of a 30:1 output ratio and that supports at least 017"-.023" (0.43-0.58 mm) tip.MACROPOXY 646-100 N Epoxy (Part B) Product Details Share on Facebook Share on Twitter Share on Pinterest Share on Houzz Share this with your friends Print page. NEW. MACROPOXY 646-100 N Epoxy (Part B) {{ ctrl.bvAvgRatingForScrReaders }} Star rating …A two-component, fast-drying polyamide epoxy. Designed to protect steel and concrete, Macropoxy® 646 N Epoxy is self priming and intended for use as an intermediate and topcoat in multiple systems. This product is recommended for use in nuclear power plants, fabrication shops, and DOE nuclear fuel and nuclear weapons facilities. MACROPOXY 646 FF is a high solids, high build, fast drying, micaceous iron oxide fi lled polyamide epoxy mastic designed to protect steel and concrete in industrial exposures. Ideal for maintenance painting and fabrication shop applications.

MACROPOXY® 646 MR (Part A) - White Consulte imediatamente um médico. Procure um centro de controle de intoxicação ou um médico. Lave a boca com água. Remover a dentadura, se houver. Caso o material tenha sido ingerido e a pessoa exposta estiver consciente, dê pequenas quantidades de água para beber. Suspenda a ingestão de água caso a ...

A two-component, rust-inhibitive, ultra high-solids penetrating epoxy primer/sealer. Designed for use over marginally prepared steel, concrete and aged coatings, Macropoxy® 5000 has excellent wetting properties, and penetrates concrete and tight rusted steel to provide a firm anchor for subsequent topcoats. In addition, Macropoxy 5000 can be ...MACROPOXY® 646 PW Potable Water Epoxy (Part A) Buff Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: MACROPOXY® 646 PW Potable Water Epoxy (Part A) Mill White Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: A two-component, high-solids, fast-drying polyamide epoxy. Designed to protect steel and concrete in industrial exposures, Macropoxy® 646-100 Fast Cure Epoxy is ideal for maintenance painting and fabrication shop applications. The high-solids content ensures adequate protection of sharp edges, corners and welds. MACROPOXY 5000 is a rust-inhibitive, pigmented, ultra high solids, penetrating epoxy primer / sealer designed for use over marginally prepared steel and aged coatings. It has excellent wetting properties and penetrates tight rusted steel to provide a fi rm anchor for subsequent topcoats.SAFETY DATA SHEET. B58W620. Section 1. Identification. Product name : MACROPOXY® 646-100 Fast Cure Epoxy (Part A) Mill White. Product code : B58W620. …Android (rooted): It's helpful to have access to your phone's SD storage, but it's concerning when you don't know what's a crucial data file and what's leftover cruft. SD Maid scou...Top Performance. Macropoxy 646 excellent penetration features enable good adhesion over a diversity of substrates as carbon steel, stainless steel or galvanized surfaces. Good film barrier, chemical and abrasion resistance make it suitable for high durability in an extended number of heavy duty applications.

SDS management, distribution & revision solutions - for every budget. Free access to more than 4.5 million safety data sheets available online, brought to you by 3E. Macropoxy 646-100 Fast Cure Epoxy (Part B) Hardener - Free SDS search

Sherwin-Williams is dedicated to superior product stewardship and workplace safety. Globally Harmonized System - Safety Data Sheets (GHS-SDS), Product Data Sheets (PDS), and Environmental Data Sheets (EDS) are available for all Sherwin-Williams professional paint products and outline technical specifications, specific ingredient …

MACROPOXY® 646-100 Fast Cure Epoxy (Part A) Mill White Not available. Liquid. US / Canada: (216) 566-2917 Mexico: SETIQ 01-800-00-214-00 / (52) 55-5559-1588 24 hours / 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: MACROPOXY® 646 Fast Cure Epoxy Coating (Part A) Ultradeep Base Not available. Liquid. (216) 566-2917 SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Manufacturer :THE SHERWIN-WILLIAMS COMPANY 101 PROSPECT AVENUE, NW CLEVELAND, OHIO 44115 Are you a freelancer looking for the best invoice software? Discover our list of the best invoicing software for freelancers available today. Part-Time Money® Make extra money in y...At lower temperatures, down to 5°C, use of Macropoxy 250 Low Temperature Part B is recommended for faster curing. Suitable primers include but not limited* to: • Zinc Clad 1001 • Zinc Clad IV1 Ct. • Zinc Clad 4100 • Zinc Clad 6001 . Suitable topcoats include but not limited* to: • Macropoxy 680 • Macropoxy 985 • Acrolon 750A two-component, high-solids, high-build, fast-drying polyamide epoxy. Designed to protect steel and provide mildew resistance in industrial exposures, Macropoxy® 646 MR can be applied directly to marginally prepared steel surfaces. The high solids content ensures adequate protection of sharp edges, corners and welds.Top Performance. Macropoxy 646 excellent penetration features enable good adhesion over a diversity of substrates as carbon steel, stainless steel or galvanized surfaces. Good film barrier, chemical and abrasion resistance make it suitable for high durability in an extended number of heavy duty applications.MACROPOXY® 646 Fast Cure Epoxy (Part B) Hardener Not available. Liquid. US / Canada: (216) 566-2917 Mexico: SETIQ 01-800-00-214-00 / D.F. 5559-1588 24 hours / 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::AAA Collections is a small collection agency based in Sioux Falls, SD. They specialize in collecting on behalf of companies in the healthcare industry. By clicking "TRY IT", I agre...Macropoxy 646-100 Fast Cure Epoxy (Part B) Hardener Manufacturer Sherwin Williams / Krylon Product code B58V620, SHW-85, 646-100 Revision date 2021 April 14Jul 23, 2020 ... Macropoxy 646. 5.0-10.0. (125-250). 1 Ct. Sher ... Tint 150% tint strength with Maxitoner Colorants only into Part ... Refer to the SDS sheet before ...

MACROPOXY 985 PART A WHITE/LIGHT BASE 252101 Liquid. +(61)290372994 (Available 24 hrs/ 7 days) SAFETY DATA SHEET Product identifier Product code Product type Emergency telephone number (with hours of operation) Section 1. Identification:::: Supplier's details :VALSPAR PAINT (AUSTRALIA) PTY LIMITED L3, 2 Burbank Place, …SDS management, distribution & revision solutions - for every budget. Free access to more than 4.5 million safety data sheets available online, brought to you by 3E. ... MACROPOXY 646-100 Fast Cure Epoxy (Part B) Manufacturer Sherwin Williams / Krylon Product code B58V620, 646-100 Revision date 2021 April 14 Language English. …MACROPOXY® 646 (Part B) - Hardener Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II B58V600 SECTION 3: Composition/information on ingredients 01 …Instagram:https://instagram. how to reset dodge caravan oil change lightdan and shay doswell vakroger gas pump hourscar tow dolly sale used Part B: 1 gallon (3.78L) and 5 gallon (18.9L) containers ... Refer to the SDS sheet before use. Published technical data and instructions are subject to change without notice. Contact your Sherwin-Williams representative for additional technical data and ... 1 ct. Macropoxy 646-100 Fast Cure Epoxy 3.0-6.0 (75-150) 1-2 cts. of recommended ...Part B: 1 gallon (3.78L) and 5 gallon (18.9L) containers ... Refer to the SDS sheet before use. Published technical data and instructions are subject to change without notice. Contact your Sherwin-Williams representative for additional technical data and ... 1 ct. Macropoxy 646-100 Fast Cure Epoxy 3.0-6.0 (75-150) 1-2 cts. of recommended ... the iron claw showtimes near regal willamette town centerlarkspur and daffodil tattoo Footnotes: 1 Zinc Clad II Plus Primer. MACROPOXY 646-100 FAST CURE EPOXYis a high solids, less than 100 g/L VOC, high build, fast drying, polyamide epoxy designed to protect steel and concrete in industrial exposures. Ideal for maintenance painting and fabrication shop applications. rest area near me i 95 north A two-component, high-solids, fast-drying polyamide epoxy mastic. Designed to protect steel and concrete in industrial exposures, Macropoxy® 646 epoxy is ideal for maintenance painting and fabrication shop applications. The high-solids content ensures adequate protection of sharp edges, corners and welds. This product can be applied directly ...A two-component, high-solids, high-build, fast-drying polyamide epoxy. Designed to protect steel and provide mildew resistance in industrial exposures, Macropoxy® 646 MR can be applied directly to marginally prepared steel surfaces. The high solids content ensures adequate protection of sharp edges, corners and welds.